Quality Management
Home > Quality Management

A leading market position requires good products and outstanding performance. Within the framework of our Total Quality Management (TQM), measures to ensure quality are not performed at the end of the manufacturing process in terms of quality control, but integrated into the process. We try to achieve customer satisfaction as cost-effectively as possible with as little waste of resources as possible. Our objective is to produce quality, not control it!

Our well-established quality procedures make the entire production-chain smooth, efficient and consistent and our quality department is equipped to perform many different tests:

LEVEL 2 OPERATOR:
  • VT, PT, UT
  • Qualifications according to EN ISO 9712-2012
STANDARDS:
  • PT: EN ISO 3452-1:2013; EN 23277
  • UT: EN ISO 16810-2014; EN 11666; EN 17635; ASTM E164; EN 10160

As a standard, we supply our products with a certificate (either 2.2 or 3.1) according to EN 10204. On demand, customers can order also a third party witnessed 3.2 certificate issued by an accredited inspection institute.

Our quality department is qualified to cope with special requirements and to cooperate with external inspectors of various industrial sectors such as nuclear, oil and gas, aeronautical, naval, railway and many others.

Our internal International Welding Engineer (IWE) supervises both welding operations in production and if necessary supports the quality department.

The whole team is accustomed to manage and handle special quality related requests that regularly raise from our customers.

Peak Kong Special Steel
Peak Kong Special Steel has obtained and is regularly audited by third-party certification agencies and meets the following standards:
Certifications
  • ISO 9001:2015
  • AD 2000-Merkblatt W0
  • PED 97/23/EG
  • EN 10088-5
  • EN 10025-1
  • EN 1090-1
  • DIN EN ISO 3834-2
  • Welding Certificate EN 1090-2
  • Norsok M-650
  • DNV-GL-CP-0352
Standard and Norms
Europe
America
Asia
  • EN 10088-3
  • EN 10056-2
  • EN 10365
  • EN 10088-5
  • EN 10278
  • DIN 59370
  • EN 10025-2
  • EN 10279
  • DIN 6880
  • EN 10034
  • EN 10219-2
  • EN 10055
  • DIN 1022
  • EN 10056-1
  • DIN 1018
  • ASTM A1069
  • ASTM A320
  • AMS 5647
  • ASTM A276
  • ASME SA479
  • AMS 2248
  • ASTM A480
  • AMS 2241
  • AMS QQS 763 A
  • ASTM A484
  • AMS 5640
  • ISO 13919-1
  • ASTM A554
  • AMS 5653
  • ISO 15609-4
  • ASTM A479
  • AMS 5648
  • ISO 15614-11
  • ASTM A6
  • AMS 5639 (type 1)
  • ASTM A1069
  • ASTM A320
  • AMS 5648
  • ASTM A276
  • ASME SA479
  • AMS 5639 (type 1)
  • ASTM A480
  • AMS 2241
  • AMS 5647
  • ASTM A484
  • AMS 5640
  • AMS 2248
  • ASTM A554
  • AMS 5653
  • AMS QQS 763 A
  • ASTM A479